Sagitter ARCHER B5 User Manual page 22

Version
Temperature
Info Used Time
Lamp Time
Reset Error
Run Time
Reset Lamp Time
Advanced
OffSet
5.1.1 DETAILED DESCRIPTION "Wireless Option":
WIRELESS PRIORITY – XLR PRIORITY:
The selection of one of the two options gives priority to the same and the projector will always work
with the last signal received. This function is useful in case you want to create a backup line, Wireless or
XLR, giving the possibility, in case of failure, to use the alternative line.
WIRELESS ONLY – XLR ONLY:
By selecting one of the two options, it takes the exclusivity. For example, by selecting "XLR only", even if
the wireless is ON and linked, the projector will respond only to signals received via cable. The same will
happen by selecting "Wireless only" the projector will respond only to the wireless signals.
ENTER 3S UNLINK:
By pressing "Enter" for at least 3 seconds, the projector disconnects from the wireless network. To
verify that this procedure has been successfully carried out, with the XLR cable disconnected, return to
the main screen, the DMX address will blink.
It is also possible to unlink the wireless from the transmitter by pressing the "PAIRING" button pressed
for at least 3 seconds.
Software version
Value of temperature
Time of use of the projector
Time of use of the lamp
Press Enter Description of error during the reset
Total time of use (not resettable)
Time of Lamp use (resettable)
Pan Pan calibration
Tilt Tilt calibration
Color Color wheel calibration
Gobo Gobo wheel calibration
Dimmer Dimmer calibration
Focus Focus calibration
Prism1 Prism 1 calibration
Prism2 Prism 2 calibration
Frost Frost calibration
22