Table of Contents
Advertisement
2-6
PC Health Status
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Vcore
DDR 2.5V
+3.3V
+12V
Current CPU Temperature
Current CPU FAN Speed
Current SYSTEM FAN Speed
CPU Smart FAN Control
CPU Smart FAN Mode
: Move
Enter: Select
F5: Previous Values
Current Voltage(V) Vcore / DDR 2.5V / +3.3V / +12V
Detect system's voltage status automatically.
Current CPU Temperature
Detect CPU temperature automatically.
Current CPU/SYSTEM FAN Speed (RPM)
Detect CPU/SYSTEM fan speed status automatically.
CPU Smart FAN Control
Eabled
Enable the CPU Smart FAN Control function. (Default Value)
a. When the CPU temperature is higher than 65 degrees Celsius, CPU fan
b. When the CPU temperature is between 20 and 65 degrees Celsius, the
c . When the CPU temperature is lower than 20 degrees Celsius, CPU fan
Disabled
Disable the CPU Smart FAN Control function.
CPU Smart FAN Mode
This option is available only when CPU Smart FAN Control is enabled.
Auto
BIOS autodetects the type of CPU fan you installed and sets the optimal CPU
Smart FAN control mode for it. (Default Value)
Voltage
Set to Voltage when you use a CPU fan with a 3-pin fan power cable.
PWM
Set to PWM when you use a CPU fan with a 4-pin fan power cable.
In fact, the Voltage option can be used for CPU fans with 3-pin or 4-pin power cables.
However, some 4-pin CPU fan power cables are not designed following Intel 4-wire fans
PWM control specifications. With such CPU fans, selecting PWM will not effectively reduce
the fan speed.
PC Health Status
OK
OK
OK
OK
33
o
C
4687 RPM
0
RPM
[Enabled]
[Auto]
+/-/PU/PD: Value
F6: Fail-Safe Default
will operate at full speed.
CPU fan speed will change depending on the actual CPU temperature.
will stop spinning.
- 39 -
Menu Level
[Disabled]
Don't reset case
open status
[Enabled]
Clear case open status
and set to be Disabled
at next boot
F10: Save
ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help
BIOS Setup
Advertisement
Table of Contents
