Standard Cmos Features - Gigabyte GA-8S648FX-775 User Manual

2-1

Standard CMOS Features

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Channel 0 Master
IDE Channel 0 Slave
IDE Channel 1 Master
IDE Channel 1 Slave
Drive A
Drive B
Floppy 3 Mode Support
Halt On
Base Memory
Extended Memory
Total Memory
: Move Enter: Select
F5: Previous Values
Date
The date format is <week>, <month>, <day>, <year>.
Week The weekday, from Sun. to Sat., is determined by the BIOS and displayed
only.
Month The month, from Jan. to Dec.
Day The date, from 1 to 31 (or the maximum allowed in the month).
Year The year, from 1999 through 2098.
Time
The times format in <hour> <minute> <second>. The time is calculated based on the 24-hour
military-time clock. For example, 1 p.m. is 13:00:00.
IDE Channel 0 Master, Slave /IDE Channel 1 Master, Slave
IDE HDD Auto-Detection
IDE Channel 0/Channel 1 Master(Slave) setup
Auto Allows BIOS to automatically detect IDE devices during POST. (Default value)
None Select this if no IDE devices are used and the system will skip the automatic
detection step and allow for faster system start up.
Manual User can manually input the correct settings
Access Mode Use this to set the access mode for the hard drive. The four options are:
CHS/LBA/Large/Auto (Default:Auto)
Capacity Capacity of currently installed hard disk.
Hard drive information should be labeled on the outside drive casing.
Enter the appropriate option based on this information.
Cylinder Number of cylinders
Head Number of heads
Precomp Write precomp
Landing Zone Landing zone
Sector Number of sectors
GA-8S648FX-775(-C) Motherboard
Standard CMOS Features
Fri, Oct 1 2004
10:11:24
[None]
[None]
[None]
[None]
[1.44M, 3.5"]
[None]
[Disabled]
[All, But Keyboard]
640K
127M
128M
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Default F7: Optimized Defaults
Press "Enter" to select this option for automatic device detection.
You can use one of the three methods below:
- 30 -
Item Help
Menu Level
Change the day, month,
year
<Week>
Sun. to Sat.
<Month>
Jan. to Dec.
<Day>
1 to 31 (or maximum
allowed in the month)
<Year>
1999 to 2098
ESC: Exit F1: General Help