Table of Contents
Advertisement
Quick Wireless Network Setup Instructions
For quick and easy instructions on how to set up your wireless network, please follow the steps below.
For more detailed setup procedure, please refer to page 6, and if a connection is not established correctly and
an error message appears, see "Error codes/Error messages" on page 13.
■ Requirements for the wireless network
connection
The wireless network connection complies with IEEE
802.11 n/g/b standards and uses the 2.4 GHz frequency.
The Wireless Network Name (SSID) and Password
(KEY)* for your wireless access point/router are required
to connect your machine to a wireless network.
Find this information and note it first.
Make sure that you have the right password and note
some password are case (upper case & lower case)
sensitive.
Network Name (SSID)
*
Your network name selection should match the
wireless network that your PC or mobile device is
connected.
a
Turn on the machine.
When the following message appears, touch the
"OK" key.
b
Touch
in the home screen.
Network Password
(Network Key)
c
Select "ON" for "WLAN Enable".
d
Under "Network" settings screen as shown
below, touch "Setup Wizard".
Available Network Name (SSID) will be
displayed.
e
f
For step
&
please refer to "Requirements for
the wireless network connection" before step
You'll need your Wireless Network Name (SSID) and
Network Password (Network Key).
e
Select your Network Name (SSID), and then
touch the "OK" key.
f
Type in the Network Password (Key), and then
touch the "OK" key.
a
.
3
Advertisement
Table of Contents
