Advertisement
Installation (cont.)
Decor Star
1"
4. Using a drill with a tile bit, drill the hole slowly
into the tile. Do not drill into any piping or wiring in
the wall. Insert the anchors into the wall. (NOTE:
Before installing the wall anchors, use a small
piece of painters tape or masking tape over the
drill area. This will prevent damages to the tile)
5. Secure the mounting brackets to the wall.
6. Apply thread sealant tape to the threading on
the shut off valves before connect both hot and
cold water supply hoses to the valves. Turn on
the valves and check all connections for possible
leaks.
8
PL-008-SS Rev. A3 122015
Advertisement
