How To Use Height Adjustment Feet - 3M MP8635B Operator's Manual

4.2 How To Use Height Adjustment Feet

Adjust the image elevation using the height adjustment at the front of the projector.
1. Raise the front end of the projector so the foot is not touching the table top.
2. Push the lock button to unlock the foot.
3. Extend or retract the foot to the desired height.
4. Release the lock button to lock the foot into position.
5. For fine adjustments, rotate the foot.
Do not unlock the foot adjuster if the projector is not supported. If the foot adjuster does not lock
completely, turn the foot adjuster slightly before locking.
12
Caution
Front View
Side View
Figure 4.3 Height Adjustment
™
3M Multimedia Projector MP8635
(0-9 O )
EPS-72A
© 3M 1999