Remote Control Transmitter Identification - 3M MP8635B Operator's Manual

2.4 Remote Control Transmitter Identification

STANDBY / ON button
Set main power switch to ON. Press and
hold STANDBY/ON button for projector
mode (lamp on) or standby mode (lamp off).
FREEZE button
Press to display single frame of projector
image. Press again to release freeze
function. (Operation of Disk Pad and some
setup items will not function when freeze is
active.)
MAGNIFY buttons
Press +/- to magnify image (4x
magification). Press POSITION button and
use disc pad to view entire image. Press
OFF button to return to normal image size.
POSITION button
Press and light POSITION button.
Move DISC PAD to adjust horizontal/
vertical image position.
DISC PAD
Select mode, then move DISC PAD to
position image, navigate menus or control
mouse functions. To select the mode:
• Press and light POSITION button for
position mode.
• Press and light MENU ON button for
menu mode.
MENU ON button
Press and light MENU ON button to display
the Main Menu. Move DISC PAD to select
menu and/or adjust screen values.
BLANK ON button
Press BLANK to display a blank
background with no image. Press again to
return the image to the screen.
INPUT buttons
RGB 1/2: Select computer video input
(RGB1 RGB2 RGB1).
VIDEO 1/2: Select video inputs
(VIDEO1 VIDEO2 VIDEO1).
AVOID EXPOSURE-LASER
RADIATION IS EMITTED
FROM THIS APERTURE
Laser Aperture
© 3M 1999
LASER APERTURE
STANDBY/ON MUTE
FREEZE
MAGNIFY VOLUME
OFF
POSITION ON LASER
RESET RIGHT
MENU ON MOUSE ON
BLANK TIMER
RGB VIDEO
INPUT
EPS-70A
Battery Cover
(Use AA or LR6 batteries)
Figure 2.3 Remote Control Buttons
3M ™ Multimedia Projector MP8635
MUTE button
Press MUTE to switch the audio
sound ON or OFF
VOLUME button
Press +/- to adjust internal/external speaker
volume.
LASER POINTER
Press and hold down button to project laser
pointer.
CAUTION
To prevent injury to eyesight, do not point
laser beam at other persons or look directly
into laser beam.
LEFT MOUSE
button
Backside
of Remote
RESET / RIGHT MOUSE button
RESET: When a menu is being displayed,
press RESET to return menu value to factory
setting.
RIGHT MOUSE: When computer image is
being displayed, press for right mouse button
function.
MOUSE ON button
Press MOUSE ON button to activate mouse
mode. Move DISK PAD to control mouse
functions.
TIMER ON / OFF button
Press TIMER to display and start the timer as
set in OPT menu setting. Note: Timer will not
display on a blank screen. To remove TIMER
display press again.
C A U T I O N
LASER RADIATION
DO NOT STARE INTO BEAM
WAVE LENGTH: 670 nm
MAX. OUTPUT: 1mW
CLASS II LASER PRODUCT
9