Cooktop Controls; Stainless Steel - KitchenAid KDRS467VBU00 Use And Care Manual

CARE AND CLEANING
` `
4.
Remove remaining residue.
Fold a damp towel and with the pad holder or wooden spoon,
go over the griddle to remove remaining residue.
`
5.
Turn off griddle and let cool.
`
6.
Wipe off griddle.
Once cool, wipe the griddle with a clean, damp terry cloth towel.
Then buff with a microfiber cloth. If streaking, rainbowing, or
ghosting occur use a mixture of 1 part white vinegar to 2 parts
water on a towel to wipe the griddle.
`
7.
Remove, empty, and clean drip tray.
Clean the drip tray with warm soapy water. Wipe the area under
the drip tray clean. Once dry, put the drip tray back in position.
26

COOKTOP CONTROLS

1.
Remove knobs.
Pull the knobs straight away from the control panel to remove.
2.
Clean with warm, soapy water.
Know Your Cooktop Controls
To avoid damage to the cooktop controls, do not use
■
steel wool, abrasive cleansers or oven cleaner.
To avoid damage, do not soak knobs.
■
When replacing knobs, make sure knobs are in the
■
Off position.
Do not remove seals under knobs.
■
When replacing knobs after cleaning either the surface
■
burner controls or the griddle module control, make sure
the knobs are replaced to the correct location. The power
burner knobs have power settings and the griddle knob
has temperature settings. All other knobs have Hi, Med,
Lo settings only.

STAINLESS STEEL

Use cleaner or wipes.
Use affresh ® Stainless Steel Cleaner or affresh
Cleaning Wipes (not included). Rub in direction of grain to avoid
possible damage to the steel surface.
Do not use:
Soap-filled scouring pads
■
Abrasive cleaners
■
Cooktop Polishing Creme
■
Steel-wool pads
■
Gritty washcloths
■
Abrasive paper towels
■
® Stainless Steel