Griddle - KitchenAid KDRS467VBU00 Use And Care Manual

4.
1
A
Replace burner assembly. Insert the orifice tube on the
front of the burner assembly into the opening at the front
of the grill basin and set into place.
5.
2
B
A
1
Replace flame spreader. Insert front tabs of the flame
spreader into slots at the front of the grill basin; then
insert rear tabs into the rear slots.
6.
Place wave tray on top of flame spreader.
7.
Place grill grate into position.
Front opening
1
Grill front
1
Rear tabs and slots
2
CARE AND CLEANING

GRIDDLE

Tips:
Prior to cleaning the griddle make sure that all cooktop
■
burners have been turned off and the oven controls
have been locked.
For best results, clean the griddle shortly after removing
■
the food.
Do Not Use:
Soap
■
Abrasive materials
■
Cleaning materials, including stainless steel cleaner
■
After Each Use:
1.
Heat for 10 to 15 minutes at 300°F.
2.
Pour water on soiled area.
Using a measuring cup, pour up to 1 cup tap water over the
soiled area starting at the back allowing the water to run toward
the drip tray in the front. Allow the water to bubble on the griddle
for 3–4 seconds.
Use a pad holder or wooden spoon with non-scratch pad. Use
pressure on soiled areas. Repeat if needed for heavy soils.
`
3.
Scrape residue into drip tray.
Use a pad holder or wooden spoon with non-scratch pad.
Use pressure on soiled areas. Repeat if needed for heavy soils.
25