Toro Workman UTX Operator's Manual page 51

Cruise Control Switch
Press the cruise control switch
the desired drive speed; refer to
Control (page 64).
Differential-Lock Switch
Use the differential-lock switch
or disengage the front and/or rear differentials; refer
to Using the 4-Wheel Drive/Differential Lock(s) (page
65).
2-Wheel Drive/4-Wheel Drive
Switch
Use the 2-wheel drive/4-wheel drive switch
61) to toggle between 2-wheel drive and 4-wheel
drive; refer to Using the 4-Wheel Drive/Differential
Lock(s) (page 65)
(Figure 61) up to set
Using the Cruise
(Figure 61) to engage
(Figure
Horn Switch
Press the horn switch
USB Power Point
Use the power point
devices.
Gear Selector
Use the gear selector
transmission between P (
( ), H (H
NEUTRAL IGH
ground operation.
Important:
Do not shift the transmission to the
R , H , or L
EVERSE IGH
is motionless and the engine is at low-idle;
otherwise, you could damage the transmission.
51
(Figure 61) to sound the horn.
(Figure 61) to power mobile
(Figure 61) to shift the
), R (
PARK REVERSE
F ), and L (
ORWARD LOW FORWARD
gear unless the machine
OW
), N
)