Toro Workman UTX Operator's Manual page 16

6. Repeat steps 3 through
bar assembly.
7. Loosely secure the right, front roll bar assembly
to the right roll bar mount bracket using 2
hex-head bolts (3/8 x 1-1/4 inches) and 2
locknuts (3/8 inch) as shown in
Figure 13
5 for the left, rear roll
Figure 13.
g361799
8. Loosely secure the right, front roll bar assembly
to the right, rear roll bar assembly using 2
hex-head bolts (3/8 x 1-1/4 inches) and 2
locknuts (3/8 inch) as shown in
16
Figure
Figure 14
14.
g361800