Calibration - Daikin TSTATD2152-2 Owner's Manual

Calibration

Under normal circumstances it will not be necessary to adjust
the calibration of the temperature sensor. If calibration is
required, please contact a trained HVAC technician to correctly
perform the following procedure.
Enter advanced setup by sliding the Program Switch to SET. When the
clock is flashing, press the NEXT button for 5 seconds. Do not release
the button until this screen appears.
Press NEXT
to advance
NEXT
Press NEXT
to advance
MTuWThF
SaSu
NEXT
Day
Night
Press NEXT
to advance
NEXT
PROGRAM
RUN OFF SET
AM
Morning Evening
PM
SET
FILTER
AUX
HEAT
COOL
Slide the Program Switch to OFF or RUN to
return to normal operation.
When the Cycles Per Hour is
flashing, press and hold the
NEXT button until this screen
appears.
Press the NEXT button
twice to advance to the
calibration screen.
Adjust the temperature
reading using the WARMER
and COOLER buttons, then
press the NEXT button to
store the new value.
21