Table of Contents
Advertisement
Figure 74. Removing the E-lock
Figure 75. Installing the E-lock
5. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 62.
Replacing the cover presence switch
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove any media from the drives and turn off all connected devices and the computer. Disconnect all
power cords from electrical outlets and disconnect all cables from the computer.
2. Remove the computer cover. See "Removing the computer cover" on page 19.
3. Disconnect the cover presence switch cable from the system board.
4. Replace the cover presence switch.
.
Chapter 4
Replacing hardware
47
Advertisement
Table of Contents
