Table of Contents
Advertisement
3. Remove the front bezel. See "Replacing the front bezel" on page 20.
4. Pivot the drive bay assembly upward. See "Pivoting the drive bay assembly upward and downward" on
page 23.
5. Replace the coin-cell battery.
Figure 94. Removing the coin-cell battery
Figure 95. Removing the coin-cell battery
Figure 96. Installing the coin-cell battery
Figure 97. Installing the coin-cell battery
6. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 62.
To dispose of the coin-cell battery, refer to Lithium coin-cell battery notice in the Safety and Warranty Guide.
.
Chapter 4
Replacing hardware
55
Advertisement
Table of Contents
