Replacing the cover presence switch
Attention
1
Remove the computer cover. For details, see
2
Remove the front bezel. For details, see
3
Pivot the drive bay assembly upward. For details, see
4
Disconnect the cover presence switch cable from the system board.
5
Replace the cover presence switch.
1
6
Connect the new cover presence switch cable to the system board.
7
Complete the replacement. For details, see
Replacing FRUs
Do not open your computer or attempt any repairs before reading the Important
Product Information Guide.
Replacing the front bezel.
Removing the computer cover.
Pivoting the drive bay assembly upward and downward.
2
Completing the parts replacement.
50