Pnp/Pci Configurations - Gigabyte GA-6OMM7E User Manual

6OMM7E Motherboard

PnP/PCI Configurations

CMOS Setup Utility-Copyright( C ) 1984-2000 Award Software
Reset Configuration Data
Resources Controlled By
* IRQ Resources
PCI/VGA Palette Snoop
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Reset Configuration Data
Disable this function. (Default value)
Disabled
ESCD Clear PnP information in ESCD.
DMI Update Desktop Management Information data.
Both Clear PnP information in ESCD & update DMI data.
Resources Controlled by
Manual
Auto (ESCD)
IRQ ( 3,4,5,7,9,10,11,12,14,15 )
Legacy ISA
PCI/ISA PnP
PnP/PCI Configurations
Figure 8: PnP/PCI Configurations
User can set the PnP resource (I/O Address, IRQ & DMA channels)
used by legacy ISA DEVICE.
BIOS automatically use these PnP rescuers. (Default value)
The resource is used by Legacy ISA device.
The resource is used by PCI/ISA PnP device (PCI or ISA).
65
Disabled
Auto (ESCD)
Menu Level
Press Enter
When resources are
controlled manually,
assign each system
Disabled
interrupt a type,
depending on the type
of device using the
interrupt
Item Help
F1:General Help