Uart Mode Select - Gigabyte GA-6IEM User Manual

? Onboard Ser ial Port 1
BIOS will automatically setup the port 1 address.
?Auto
Enable onboard Serial port 1 and address is 3F8. (Default value)
?3F8/IRQ4
Enable onboard Serial port 1 and address is 2F8.
?2F8/IRQ3
Enable onboard Serial port 1 and address is 3E8.
?3E8/IRQ4
Enable onboard Serial port 1 and address is 2E8.
?2E8/IRQ3
Disable onboard Serial port 1.
?Disabled
? Onboard Ser ial Port 2
BIOS will automatically setup the port 2 address.
?Auto
Enable onboard Serial port 2 and address is 3F8. (Default value)
?3F8/IRQ4
Enable onboard Serial port 2 and address is 2F8.
?2F8/IRQ3
Enable onboard Serial port 2 and address is 3E8.
?3E8/IRQ4
Enable onboard Serial port 2 and address is 2E8.
?2E8/IRQ3
Disable onboard Serial port 2.
?Disabled

? UART Mode Select

(This item allows you to determine which Infra Red(IR) function of Onboard I/O chip)
Set onboard I/O chip UART to ASKIR Mode.
?ASKIR
Set onboard I/O chip UART to IrDA Mode.
?IrDA
Set onboard I/O chip UART to SCR Mode.
?SCR
Set onboard I/O chip UART to Normal Mode. (Default Value)
?Normal
? UR2 Dupl ex Mode
IR Function Duplex Half. (Default Value)
?Half
IR Function Duplex Full.
?Full
45
BIOS Setup