Usb Controller; Usb Keyboard Support; Init Display First - Gigabyte GA-6IEM User Manual

? IDE1 Conductor Cable
Will be automatically detected by BIOS. (Default Value)
?Auto
Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE device
?ATA66/100
and cable is compatible with ATA66/100).
Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and
?ATA33
cable is compatible with ATA33).
? IDE2 Conductor Cable
Will be automatically detected by BIOS. (Default Value)
?Auto
Set IDE2 Conductor Cable to ATA66/100 (Please make sure your IDE device
?ATA66/100
and cable is compatible with ATA66/100).
Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and
?ATA33
cable is compatible with ATA33).

? USB Controller

Enable USB Controller. (Default value)
?Enabled
Disable USB Controller.
?Disabled

? USB Keyboard Support

Enable USB Keyboard Support.
?Enabled
Disable USB Keyboard Support. (Default value)
?Disabled
? USB Mouse Support
Enable USB Mouse Support.
?Enabled
Disable USB Mouse Support. (Default value)
?Disabled

? Init Display First

Set Init Display First to PCI. (Default value)
?PCI
?Onboard/AGP Set Init Display First to Onboard / AGP.
43
BIOS Setup