Parallel Port Mode; Ecp Mode Use Dma - Gigabyte GA-6IEM User Manual

GA-6IEM Series Motherboard
? Onboard Par allel port
Enable onboard LPT port and address is 378/IRQ7. (Default Value)
?378/IRQ7
Enable onboard LPT port and address is 278/IRQ5.
?278/IRQ5
Disable onboard LPT port.
?Disabled
Enable onboard LPT port and address is 3BC/IRQ7.
?3BC/IRQ7

?Parallel Port Mode

Using Parallel port as Standard Parallel Port. (Default Value)
?SPP
Using Parallel port as Enhanced Parallel Port.
?EPP
Using Parallel port as Extended Capabilities Port.
?ECP
Using Parallel port as ECP & EPP mode.
?ECP+EPP

?ECP Mode Use DMA

Set ECP Mode Use DMA to 3. (Default Value)
?3
Set ECP Mode Use DMA to 1.
?1
?AC Back Function
System power on depends on the status before AC lost.
?Memory
Always in Off state when AC back. (Default value)
?Soft-Off
Always power on the system when AC back.
?Full-On
?Game Port Address
Disabled this function.
?Disabled
Set Game Port Address to 201. (Default Value)
?201
Set Game Port Address to 209.
?209
?Midi Port Address
Disabled this function.
?Disabled
Set Midi Port Address to 290.
?290
Set Midi Port Address to 300.
?300
Set Midi Port Address to 300.(Default Value)
?330
46