Uart Mode Select; Ur2 Duplex Mode; Onboard Parallel Port; Parallel Port Mode - Gigabyte GA-8IRX User Manual

? UART Mode Select

(This feat u re allows you to determine which Inf r a Red(IR) function of Onboard I/O chip)
Using as IR and set to ASKIR Mode.
?ASKIR
Using as IR and set to IrDA Mode.
?IrDA
Using as standard serial port . (Default Value)
?Normal
Using as smart cardInterf a ce.
?SCR

? UR2 Duplex Mode

This feature allows you to select the I R modes.
IR Function Duplex Half. (Default Value)
?Half
IR Function Duplex Full.
?Full

? OnBoard Parallel port

This feature allows you to select from a given set of parameters if the parallel port uses the
onboard I /O controller.
Enabl e On Board LPT port and address is 378.(Default Value)
?378/IRQ7
Enable On Board LPT port and address is 278.
?278/IRQ5
Enable On Board LPT port and address is 3BC.
?3BC/IRQ7

? Parallel Port Mode

This feature allows you to connect with an advanced print via the port mode it supports.
Using Parallel port as Standard Parallel Port using IRQ7. (Default Value)
?SPP
Using Parallel port as Enhanced Parallel Port IRQ5.
?EPP
Using Parallel port as Extended Capabil i ties Port using IRQ7.
?ECP
Using Parall e l port as ECP & EPP mode.
?ECP+EPP
13
Technical Reference