Installing The Legs; Installing The Worktop Frontguard - Bertazzoni MAST305DFMNEE Installation Manual

INSTALLING THE LEGS

Bertazzoni ranges must be used only with the legs
properly installed.
Four height-adjustable legs are supplied with the
range in the polysterene container situated over
the appliance.
Before installing the legs, position the appliance
near its fi nal location as the legs are not suitable
for moving the appliance over long distances.
After unpacking the range, raise it enough to in-
sert the legs in the appropriate receptacles situa-
ted on the lower part of the appliance. Lower the
range gently to keep any undue strain from legs
and mounting hardware. If possible use a pallet or
lift jack instead of tilting the unit.
Adjust leg height to the desired level by twisting
the inside portion of the leg assembly until the pro-
per height is reached. Check with a level that the
cooktop is perfectly level.
1
2
3
4
INSTALLING THE WORKTOP
FRONTGUARD
To increase the clearance between the front edge
of the worktop and the burners it is possible to
install the worktop frontguard shipped with the ap-
pliance.
To install the front guard,
•
Locate the two fi xing holes on the end of the
frontguard
•
Locate the two fi xing holes in the bottom side of
the worktop
•
Fix the frontguard with the 2 supplied screw
/ Installation
17