Table of Contents
Advertisement
Daily Operations (cont.)
On the Status Display
If you press the INPUT SELECT button (☞ r on page 10) currently lit, the status of the input signal and setting of MUTING are displayed for about
3 seconds.
●
Make the setting to display/hide the status in "Status Display" of the "Information" (☞ page 19).
●
When "Status Display" is set to "Auto" or "On," the status below is also displayed in the following cases:
– When you change the input
– When the signal condition of the current input changes
– When you turn on the monitor
●
When "Status Display" is set to "On," the signal format will remain displayed 3 seconds after the status is
displayed.
1 Signal format
●
For the contents displayed, see "Available signals" on page 29 and "On the signal format" below.
On the signal format
The following messages appear depending on the type of input signals and their conditions.
When a HDMI signal protected with HDCP is input
When no video signal comes in
When a noncompliant video signal comes in
2 Signal format of HDMI and COMPO./RGB input
3 Setting of "MUTING"
• Only appears when in mute mode. (☞ 4 on page 10).
Menu Configuration
The operation procedure
1
Press the MENU button to display the Main Menu
To display the Main Menu
➡ Press the MENU button.
To display the Set-Up Menu
➡ Press the
button while holding the
2
Use the
buttons to select an item and press the
proceed to the next screen
3
Use the
buttons to select an item and press the
proceed to the next screen
●
For some items, pressing the
4
Use the
buttons to select an item and use the
to adjust the setting
5
Press the MENU button to finish operations
●
Press the MENU button repeatedly until the menu screen disappears.
12
➔
"*" (at the end of the indication)
➔
"No Sync"
➔
"Out of range"
button.
button to
button to
buttons adjusts the setting.
buttons
Main Menu
Selected item
Operation
●
The menu screen disappears automatically if no operations are
made for about 30 seconds.
●
Inoperable menus will be grayed out.
●
Some items will not be displayed on the menu depending on the
selected input and signal format.
Set-Up Menu
guide
Ex.: When "Picture Function"
in the Main Menu is selected
Advertisement
Table of Contents
