Menu Configuration-Main Menu - JVC TM-17L2D Instructions Manual

Menu Configuration—MAIN MENU
Main Menu Operations
1
Press MENU button.
2
Press buttons to select an item,
then press buttons to make
adjustments.
Selected item
• The menu automatically disappears in about 30 seconds after the previous operation.
• Some items may not appear on the menu depending on the input or the input signal.
• The items controlled by the MAKE system do not appear on the menu.
3
Press MENU button to finish the
menu operation.
Operation guide
Shows the buttons for each operation.
BACK LIGHT Setting value: 00 – 25
Adjusts the brightness of the display.
APERTURE Setting value: 00 – 10
Adjusts the sharpness of the picture.
CTI.*
Setting value: OFF, NORMAL, HARD
Adjusts the clearness of the outlines of the chrominance signal.
• This setting does not affect BW signals.
LTI.* Setting value: OFF, NORMAL, HARD
Adjusts the clearness of the outlines of the luminance signal.
COLOR SYSTEM*
Setting value: AUTO, NTSC, PAL
Selects the color system.
• If the picture is unstable with "AUTO," select "NTSC" or "PAL."
sub menu POSI. Setting value: LOWER, UPPER
Selects the position of the picture adjustment bar and volume adjustment bar.
* Displayed only when VIDEO 1 or VIDEO 2 is selected for the input.
8