Menu Configuration-Main Menu - JVC DT-V17L3R Instructions Manual

Menu Configuration—MAIN MENU
For the operation procedure, see page 7.
Operation guide
Shows the buttons for each operation.
• The menu automatically disappears in about 30 seconds after the previous operation.
• Some items may not appear on the menu depending on the input or the input signal.
• The items controlled by the MAKE system do not appear on the menu.
PICTURE FUNCTION
Setting for the picture quality
Item To do
APERTURE Select the frequency of the luminance signal compensated in
FREQ.* 1
"APERTURE LEVEL."
APERTURE Compensate the frequency response of the luminance signal of the
LEVEL* 1 video signal.
I/P MODE Selects a proper mode corresponding to the input picture.
sub menu Display the sub menu which enables you to adjust the items of "PICTURE FUNCTION" while
viewing the actual picture.
reset Restore the default settings for all the items in "PICTURE FUNCTION."
* 1 Memorized for each input.
BACK LIGHT Setting value: –20 – +20
Adjusts the brightness of the display.
DVI INPUT SEL.
Setting value: AUTO, MODE1, MODE2, MODE3
When "AUTO" is selected, the format of signals come in to the DVI-D (HDCP) terminal is automatically
recognized. (Normally, select "AUTO.")
• Select "MODE1", "MODE2" or "MODE3" when the picture is not displayed correctly with "AUTO."
• DVI-D input of the monitor is compatible with HDCP.
10
Setting value
OFF, LOW, HIGH
01 – 10
NORMAL, CINEMA,
FIELD