First-Time Setup Of Your Device; Unpacking And Checking The Device - Fujitsu STYLISTIC R727 Operating Manual

First-time setup of your device

First-time setup of your device
Gettingstarted First-timesetup
Please read the chapter
If your device is equipped with a Windows operating system, the necessary
hardware drivers and supplied software are already pre-installed.
Before switching it on for the first time, connect the device to the AC voltage using
the AC adapter, see
remain connected during the whole of the installation process.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
The battery must be charged if you want to operate your device using the battery.
When used on the move, the built-in battery provides the device with the necessary power. You
can increase the operating time by using the available energy-saving functions.
For instructions on how to connect external devices (e.g. mouse, printer) to your Tablet
PC, please refer to the operating manual for your device.

Unpacking and checking the device

If you find that damage has occurred during transport, please notify
your local sales outlet immediately!
► Unpack all the individual parts.
Packaging Transport
► Check your device for any visible damage which may have occurred during transportation.
You may need to reuse the packaging in the future, for example if
you need to ship your device.
18
"Important notes", Page
"Connecting the AC adapter", Page
13.
21. The AC adapter must
Fujitsu