Converstion Instructions 810-1750-S - Brinkmann 810-1750-S Installation Manual

Gas Manifold Nut
10' Natural Gas Hose
Warming Rack
Cooking Grills
Heat Shields
CONVERSION
INSTRUCTIONS
810-1750-S
CAUTION: Some parts may contain sharp
edges. Wear protective gloves if necessary.
WARNING: Only use the specific orifice
designated for your grill model. Always double
check the millimeter size on the side of the
orifice tip prior to installation. Use of any other
orifice could lead to personal injury, property
damage and void your grill warranty.
Note: Make sure all control knobs are
in the off position, LP tank valve
is closed and tank is disconnected
from regulator and removed from grill.
Step 1
Using an adjustable wrench to hold the gas
manifold connection secure, use a 3/4" wrench
to loosen the hose connection nut. Replace
existing LP hose/regulator assembly with
natural gas 10' hose assembly. Tighten the
connection carefully using two wrenches
Step 2
Remove two screws from side burner. Carefully
lift side burner up and away from valve nozzle.
Set aside for later use.
Step 3
Open hood and remove warming rack, cooking
grills and heat shields. Set aside for later use.
.
8