Converstion Instructions 810-8533-S - Brinkmann 810-1750-S Installation Manual

CONVERSION
INSTRUCTIONS
810-8533-S
CAUTION: Some parts may contain sharp
edges. Wear protective gloves
if necessary.
WARNING: Only use the specific orifice
designated for your grill model. Always double
check the millimeter size on the side of the
orifice tip prior to installation. Use of any other
orifice could lead to personal injury, property
damage and void your grill warranty.
Note: Make sure all control knobs are in the
off position, LP tank valve is closed
and tank is disconnected from
regulator and removed from grill.
Step 1
Using an adjustable wrench to hold the gas
manifold connection secure, use a 3/4" wrench
to loosen the hose connection nut. Replace
existing LP hose/regulator assembly with natural
gas 10' hose assembly. Tighten the connection
carefully using two wrenches.
Step 2
Remove cotter pin from side burner "foot".
Carefully lift side burner up and away from
valve nozzle. Set aside for later use.
Cotter Pin
Step 3
Open hood and remove warming rack, cooking
grills and heat shields. Set aside for later use.
17
Gas Manifold Nut
10' Natural Gas Hose
Cooking Grills
Heat Shields
Warming Rack