Canon iP110B Online Manual page 127

Note
• Do not touch the print head lock lever (B).
If you pull up the print head lock lever, lock it again.
Inside View
• Do not remove both ink tanks at the same time. Be sure to replace ink tanks one by one when
replacing both ink tanks.
• For details on ink lamp flashing speed, see
4. Remove the new ink tank from its packaging, then remove the protective cap (C) from the
bottom of the ink tank.
Important
• Do not touch the electrical contacts (D) on the ink tank.
Doing so can cause the printer to malfunction or become unable to print.
• Shaking ink tanks may cause ink to spill out and stain clothing or the surrounding area. Handle
ink tanks carefully.
• Do not touch the inside of the protective cap (C) or the open ink port (E). The ink may stain your
hands if you touch them.
• Do not reattach the protective cap (C) once you have removed it. Discard it according to the
local laws and regulations regarding disposal of consumables.
• Do not touch the open ink port (E) once the protective cap (C) is removed, as this may prevent
the ink from being ejected properly.
5. Insert the front end of the ink tank into the print head at a slant.
Align the mark with the
Checking the Ink Status with the Ink
mark.
127
Lamps.