Maintenance Procedure - Canon iP110B Online Manual

Maintenance Procedure

If print results are blurred, colors are not printed correctly, or print results are unsatisfactory (e.g. misaligned
printed ruled lines), perform the maintenance procedure below.
Important
• Do not rinse or wipe the print head and ink tank. This can cause trouble with the print head and ink
tank.
Note
• Open the print head cover and make sure that both lamps on the ink tanks are lit. If the lamps are
flashing or off, take appropriate action.
Checking the Ink Status with the Ink Lamps
• Increasing the print quality in the printer driver settings may improve the print result.
Changing the Print Quality and Correcting Image Data
When the Print Results Are Blurred or Uneven:
Print the nozzle check pattern.
Step1
From the printer
Printing the Nozzle Check Pattern
From the computer
Use Your Computer to Print a Nozzle Check Pattern
Examine the nozzle check
Step2
If there are missing lines or horizontal white streaks in the pattern:
Clean the print head.
Step3
From the printer
Cleaning the Print Head
From the computer
Cleaning the Print Heads from Your Computer
After cleaning the print head, print and examine the nozzle check pattern:
If the problem is not resolved after performing from step 1 to step 3 twice:
Clean the print head deeply.
Step4
From the computer
Cleaning the Print Heads from Your Computer
pattern.
134
Step1