I/O Device Configuration - Gigabyte GS-R1160-RH System Installation Manual

I/O Device Configuration

Serial Port A
This allows users to configure serial prot A by using this option.
Enabled
Disabled
Base I/O Address/IRQ
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Serial Port B
This allows users to configure serial prot B by using this option.
Enabled
Disabled
Figure 2-3: I/O Device Configuration
Enable the configuration (Default setting)
Disable the configuration.
Set IO address to 3F8/IRQ4. (Default setting)
Set IO address to 2F8/IRQ3.
Set IO address to 3E8/IRQ4.
Set IO address to 2E8/IRQ3.
Enable the configuration
Disable the configuration.(Default setting)
3 5
BIOS Setup