Appendix 3 Faq - Tenda W308R User Manual

11N Wireless Broadband Router User Guide

Appendix 3 FAQ

This section provides some solutions to the problems which may occur during the
router's installation or usage. The instructions below may help you deal with the
problems. If your problem is not in the list, please log into our website www.tenda.cn or
send an E-mail to support@tenda.cn, and we will reply to you at the earliest time.
1. Can not log in to the Web-based Utility of the router after you enter the IP address in
the address field?
Step 1: Check if the router is working correctly, after the device is powered on for a few
seconds, the SYS indicator on the front panel should light up. If it is not, please contact
us.
Step 2: Check the network cables are connected correctly and the corresponding LED
indicator lights up. Sometimes, the indicator lights up, but it does not mean it is
functioning.
Step 3: Run "Ping" command and check if it can ping the Router's LAN IP address
192.168.0.1 (open "Command Prompt" and type "Ping 192.168.0.1" and then enter). If it
is OK, please make sure your browser does not access the Internet by proxy server. If
the ping fails, you can press the "RESET" button for 7 seconds to restore to default
settings. And then repeat the ping operation. If it still does not work, please contact us.
2. Forgot the login password and cannot enter the Web-based Utility. What can I
do?
Press the "RESET" button for 7 seconds to restore the Router to default settings.
3. The computer connected with the Router shows IP address conflict. What can
do?
Check if there are other DHCP servers in the LAN and if there are then disable them.
The default IP address of the router is 192.168.0.1 please maker sure the address is
not being used by any other device. If there are two computers with the same IP
address, please change one of them.
4. I cannot use E-mail and access the Internet. What can I do?
57