Tenda W308R User Manual page 27


Enable Bandwidth Control: To enable or disable the internal IP bandwidth
control. The default is disabled.

IP Address: The IP address range of the hosts whose traffic has been controlled.
It can be a single IP address or IP address range.

Upload/Download: To specify the traffic heading way for the selected IP
addresses: upload or download.

Bandwidth Range: The maximum and minimum upload/download data traffic of
the hosts in specified IP range. The unit is KByte/s. The uplink of upload and
download can not exceed the WAN port bandwidth limitation range.

Enable: To enable the current edited rule. Otherwise, the rule will not go into
effect.

Add to list: After you edit the rule, click the "add to list" button to add the current
rule to the rule list.
Here we take 2Mbps bandwidth as an example. Theoretically, the biggest downloading
rate for 2Mbps bandwidth is 2Mbps=256KByte/s, and the biggest uploading rate is
512kbps=64KByte/s
Example 1
If you want to set the download rate of the computer at the IP address of 192.168.0.100
as 80-90KByte/s, upload rate as 10-15KByte/s, first add one upload rule as shown in
the picture below:
11N Wireless Broadband Router User Guide
22