I/O Device Configuration - Gigabyte GS-R114L System Installation Manual

I/O Device Configuration

Serial Port A
This allows users to configure serial prot A by using this option.
Enabled
Disabled
Base I/O Address/IRQ
3F8 Set IO address to 3F8. (Default value)
2F8 Set IO address to 2F8.
3E8 Set IO address to 3E8.
2E8 Set IO address to 2E8.
IRQ
IRQ3 Set Interrupt as IRQ3.
IRQ4 Set Interrupt as IRQ4.(Default value)
Figure 2-3: I/O Device Configuration
Enable the configuration (Default value)
Disable the configuration.
3 7
BIOS Setup