Step 3-6: Hard Disk Drive Installation - Gigabyte GS-R114L System Installation Manual

GS-R114L Rack Mount Server

Step 3-6: Hard Disk Drive Installation

Step 1 Lossen the screws securing the hard drive plate.
Step 2 Slide toward to remove the hard drive plate from system.
Step 3 Place hard disk on the plate and lock hard drive with 4 screws.
Step 4 Replace the hard drive plate, slide the blank into the bay until it locks into place.Connect HDD
power cable.
Step 5 Reverse step 1, 2, 3 and 4 to complete the HDD installtion.
Step 1
Remove
Step 3
Step 2
1 6
Step 4