Terminal Type
This option allows user to select the specified terminal type. This is defined by IEEE.
Options
Flow Control
This option provide user to enable the flow control function.
None
XON/OFF
CTS/RTS
Console Connect
This field indicates whether the console is connected directly to the system or a modem is used
to connect.
Direct
Disabled
Continue C.R. after POST
This option allows user to enable console redirection after O.S has loaded.
On
Enable console redirection after O.S has loaded.
Off
Disable this function. (Default value)
Event Log Confuguration
This option contains additional setup menu to configure the Event Log Configuration.
Clear all Event Logs
Enter
The system event log will be cleared if pressing Enter.
Assert NMI on SERR
If thisoption is set to enabled, PCI bus system error (SERR) is enabled and is routed to NMI.
Enabled
Disabled
VT100, VT100 8bit, PC-ANSI 7bit, VT100+, VT-UTF8
Not supported.
Software control.
Hardware control. (Default value)
Console is connected directly to the system. (Default)
Console is connected via the modem.
Enable Assert NMI on SERR. (Default value)
Disable this function.
5 1
BIOS Setup