Table of Contents
Advertisement
Boot -time Diagnostic
When this item is enabled, system will shows Diagnostic status when system boot.
Enable Boot-time Diagnostic.
Enabled
Disabled
Disable this function.
Reset Configuration Data
Yes
Reset all configuration data.
No
Do not make any changes. (Default value)
NumLock
This option allows user to select power-on state for NumLock.
Enable NumLock.
On
Disable this function.
Off
Memory Processor Error
When Boot is selected, the system will attempt to boot after a memory or proocessor error
occured.
System attempts to boot if a memory or proocessor error cooured.
Boot
(Default value)
Halt
System will stop if an error is detected during power up.
Multiprocessor Specification
This option allows user to configure the multiprocessor(MP) specification revision level. Some
operating system will require 1.1 for compatibility reasons.
1.4
Support MPS Version 1.4 . (Default value)
1.1
Support M PS Version 1.1.
(Default value)
4 5
BIOS Setup
Advertisement
Table of Contents
