Table of Contents
Advertisement
Starting Your Tablet P C
Power On
The Power/Suspend/Resume button is used to
turn your Fujitsu Q335 from its off state. Once
you have connected your AC adapter or charged
the internal Lithium ionbattery, you can power
on your Tablet PC.
When you turn on your Tablet PC be sure
you have a power source. This means that a
battery is installed and charged, or that the
AC adapter is connected and has power.
Press the Power/Suspend/Resume button
to start your system. When you are done
working you can either leave your Tablet PC
in Standby mode, or you can turn it off.
When the system display is closed, the
Suspend/ Resume button is disabled. This
feature prevents the system from being
accidentally powered up when not in use.
When you Power On your Tablet PC, it
will perform a Power On Self Test (POST) to
check the internal parts and configuration
for correct functionality. If a fault is found,
your Tablet PC will emit an audio warning
and/or an error message will be displayed.
Depending on the nature of the problem, you
may be able to continue by starting the
operating system or by entering the BIOS
setup utility and revising the settings.
After satisfactory completion of the Power
On Self Test (POST), your Tablet PC will
load your operating system.
Never turn your Tablet PC during the
Power On Self Test (POST) or it will cause
an error message to be displayed when you
turn your Tablet PC on the next time.
.
Using Your Stylistic
Boot Sequence
The procedure for starting-up your Tablet PC is
termed the Bootup sequence and involves your
Tablet PCʼs BIOS. When your Tablet PC is
turned on, the main system memory is empty,
and it needs to find instructionns to start up your
Tablet PC. This information is in the BIOS
program. Each time you power up or restart your
Tablet PC, it goes through a boot sequence
which displays a Fujitsu logo until your operating
system is loaded. During booting, your Tablet PC
is performing a standard boot sequence includ-
ing a Power On Self Test (POST). When the boot
sequence is completed without a failure and
without a request for the BIOS Setup Utility, the
system displays the operating systemʼs opening
screen.
The boot sequence is executed when:
•
You turn on the power to your Tablet PC.
•
You restart your Tablet PC from the
Windows Shut Down dialog box.
The software initiates a system restart
•
Example: When you install a new application.
•
You reset the system by pressing a n d
hold the Windows button, then the power
botton
Registering your Fujitsu Stylistic
Q335
How do I register?
To register your system, visit our Website at:
http://hk.fujitsu.com/pc
14
Advertisement
Table of Contents
