Creating Backup Images Of Factory Image, Dar, And Discs - Fujitsu LifeBook T731 User Manual

After you launch the ClickMe! utility when you first start up your system, you should make a copy of the
Factory Image to DVD discs. You will need several blank discs (DVD-R or DVD+R discs are
recommended) in order to create the copy. After creating the copy, be sure to label the discs and keep them
in a safe place to ensure they do not get damaged.

Creating Backup Images of Factory Image, DAR, and Discs

S
OME CONFIGURATIONS OF CERTAIN
;
DRIVE RATHER
FOLLOWING PROCEDURES
Using the [Manage/Change] button, you can create backup images of the Factory Image, DAR,
Application Disc, or Bootable Disc.
Launch My Recovery from the desktop icon.
1
Select [Manage/Create] -> [Backup Images] 
2
The Backup Images menu displays a list from which you can choose which type of disc you want to burn:
Bootable Disc, Drivers and Applications Restore Disc, Application Disc, or Recovery Disc.
Select Recovery Disc, then click [Make DVD]
3
Confirm that the # box has "2" (Note that in some cases the box may display a larger number for the factory
4
image, depending upon its size.)
The message "Recovery Disc #1. will be created. Enter your comments and number of media on the DVD".
5
Click [YES] to burn the Factory Image.
I
N THE FOLLOWING STEP
While the copy is being made, a "Writing to the media" screen displays a progress bar. When the copy is
6
complete, a dialog will appear informing you of the successful completion of the backup.
LIFEBOOK
, DAR
THEY ARE LOADED ON THE
.
,
DO NOT USE THE SYSTEM UNTIL THE COPY IS COMPLETE
120 - Restoring Your Pre-installed Software
MODELS DO NOT HAVE APPLICATIONS LOADED ON THE HARD
. P
DISC LEASE TAKE THAT INTO ACCOUNT WHEN READING THE
.