LevelOne GEMINI FCS-5212 User Manual page 86

(3)Select the area by clicking the area No.
(4)Slide the cursor to adjust the sensitivity and proportion of object on the area
for the selected area in the daytime.
(5)Slide the cursor to adjust the sensitivity and proportion of object on the area
for the selected area at night.
(6)Set the arming schedule and linkage method as in the normal configuration
mode.
(7)Click Save to save the settings.
⚫ Day/Night Scheduled-Switch
(1)Draw the detection area as in the normal configuration mode. Up to 8 areas are
supported.
(2)Select Scheduled-Switch for Switch Day and Night Settings.
User Manual of Network Camera
Figure 6-47 Day/Night Auto-Switch
Figure 6-48 Day/Night Scheduled-Switch
86