Table of Contents
Advertisement
2) Click-and-drag the detection line to adjust its position.
3) Click-and-drag the two end points of the detection line to adjust its length.
4) To delete the detection line, click the Delete Line button.
6. An arrow indicating the entering direction of people is shown after the
detection line is selected. You can click the Change Direction button to adjust
the arrow direction to opposite side.
7. Click the Reset Counter button, and the number of the people entered and
exited will be cleared to zero.
8. Click Edit to set the arming schedule.
9. Check the checkbox of Notify Surveillance Center to set the linkage action.
10. Click Save to save the settings.
❖ Counting Statistics
Steps:
1. Click People Counting Statistics to enter the data statistics interface.
2. Select the report type by clicking the drop-down menu. Daily report, weekly
report, monthly report, and annual report are selectable.
3. Select the Statistics Type as People Entered or People Exited.
4. Select the Statistics Time.
Note:
Daily report calculates the data on the date you selected, weekly report
calculates for week your selected date belongs to, monthly report calculates
for the month your selected date belongs to, and the annual report calculates
for the year your selected date belongs to.
5. Click Counting to calculate the data.
6. Select to export the Statistics Result as Table, Bar Chart, or Line Chart.
Note:
If you select table to list the statistics, there is an Export button to
export the data in an excel file.
User Manual of Network Camera
127
Advertisement
Table of Contents
