Configuring Audio Settings - LevelOne GEMINI FCS-5212 User Manual

Table of Contents

Advertisement

Scalable Video Coding is an extension of the H.264/AVC standard. Select OFF /
ON to disable / enable the SVC function. Select Auto, and the device will
automatically extract frames from the original video when the network bandwidth
is insufficient.
Smoothing:
It refers to the smoothness of the stream. The higher value of the smoothing, the
better fluency of the stream, though, the video quality may not be so satisfied. The
lower value of the smoothing, the higher quality of the stream, though it may
appear not fluent.
4. Click Save to save the settings.

6.4.2 Configuring Audio Settings

Steps:
1. Enter the Audio Settings interface
Configuration > Basic Configuration > Video / Audio > Audio
Or Configuration > Advanced Configuration > Video / Audio > Audio
2. Configure the following settings.
Note:
Audio settings vary according to different camera models.
Audio Encoding: G.722.1, G.711 ulaw, G.711alaw, G.726, MP2L2 and PCM are
selectable. For MP2L2, the sampling rate and audio stream bitrate are
configurable; for PCM, the sampling rate can be set.
Audio Input: MicIn and LineIn are selectable for the connected microphone and
pickup respectively.
User Manual of Network Camera
Figure 6-28 Audio Settings
66

Advertisement

Table of Contents
loading

Table of Contents