Configuring Time Settings - LevelOne GEMINI FCS-5212 User Manual

Table of Contents

Advertisement

Note:
You can click Browse to change the directory for saving the clips and pictures.
3. Click Save to save the settings.

6.2 Configuring Time Settings

Purpose:
You can follow the instructions in this section to configure the time synchronization
and DST settings.
Steps:
1. Enter the Time Settings interface:
Configuration > Basic Configuration > System > Time Settings
Or Configuration > Advanced Configuration > System > Time Settings
⚫ Select the Time Zone.
Select the Time Zone of your location from the drop-down menu.
⧫ Synchronizing Time by NTP Server.
(1) Check the checkbox to enable the NTP function.
(2) Configure the following settings:
Server Address: IP address of NTP server.
NTP Port: Port of NTP server.
Interval: The time interval between the two synchronizing actions with NTP
User Manual of Network Camera
Figure 6-2 Time Settings
42

Advertisement

Table of Contents
loading

Table of Contents