Table of Contents
Advertisement
normal configuration and expert configuration are selectable for different motion
detection environment.
➢
Normal Configuration
Normal configuration adopts the same one set of motion detection parameters in the
daytime and at night.
Tasks:
1. Set the Motion Detection Area.
Steps:
(1)Enter the motion detection settings interface
Configuration > Advanced Configuration> Basic Event > Motion
Detection
(2)Check the checkbox of Enable Motion Detection.
(3)Check the checkbox of Enable Dynamic Analysis for Motion if you want to
mark the detected objects with green rectangles.
Select Disable for rules if you don't want the detected objected
Note:
displayed with the rectangles. Select disable from Configuration-Local
Configuration-Live View Parameters-rules.
(4)Click Draw Area. Click and drag the mouse on the live video to draw a
motion detection area.
User Manual of Network Camera
Figure 6-42 Enable Motion Detection
81
Advertisement
Table of Contents
