Table of Contents
Advertisement
7.5 Configuring Cloud Storage
Purpose:
The captured pictures can be saved on a NVR which works in the Cloud Storage
mode.
Note:
Cloud storage function varies according to different camera models.
Before you start:
Make sure the NVR has been switched into the Cloud Storage working mode, refer to
the User Manual of NVR for details.
Steps:
1. Enter the Cloud Storage interface: Configuration > Advanced Configuration >
Storage > Cloud Storage.
2. Check the checkbox of Enable Cloud Storage.
3. Input the IP address and port of the storage server.
4. Input the user name, password and confirm password for the authentication of the
storage server.
⚫
For your privacy and to better protect your system against security risks, we
strongly recommend the use of strong passwords for all functions and
network devices. The password should be something of your own choosing
(using a minimum of 8 characters, including at least three of the following
categories: upper case letters, lower case letters, numbers and special
characters) in order to increase the security of your product.
User Manual of Network Camera
Figure 7-10 Lite Storage Settings
138
Advertisement
Table of Contents
