Table of Contents
Advertisement
A vertical line appears in the configuration window after you enable the
calibration. And a horizontal line (blue) appears if one target passed the
detection line. Up to 8 horizontal lines can be displayed on one side of the
detection line.
The horizontal line is calculated according to the shoulder width of the target.
And you can decide the calibration line position according to the width of the
targets. You can click-and-drag to adjust the calibration line position.
7. Click the Reset Counter button, and the number of the people entered and
exited will be cleared to zero.
8. Click Edit to set the arming schedule.
9. Check the checkbox of Notify Surveillance Center to set the linkage action.
10. Click Save to save the settings.
❖ People Counting Statistics
Steps:
1. Click People Counting Statistics to enter the data statistics interface.
2. Select the report type by clicking the drop-down menu. Daily report, weekly
report, monthly report, and annual report are selectable.
3. Select the Statistics Type as People Entered or People Exited.
Note:
Daily report calculates the data on the date you selected; weekly report
calculates for the week your selected date belongs to; monthly report
calculates for the month your selected date belongs to; and the annual report
calculates for the year your selected date belongs to.
4. Select the Statistics Time.
5. Click Counting to calculate the data.
6. Select to export the Statistics Result as Table, Bar Chart, or Line Chart.
Note:
If you select table to display the statistics, there is an Export button to
export the data in an excel file.
User Manual of Network Camera
121
Advertisement
Table of Contents
