Appendix; Stitch Settings; Utility Stitches - Brother CE1125PRW Operation Manual

4

APPENDIX

STITCH SETTINGS

Applications, stitch lengths and widths and whether the twin needle can be used are listed for utility stitches
and mirror image stitches (for models equipped with mirror image stitches) in the following table.
• When using the twin needle, select a stitch width of 5.0 mm (3/16 inch) or less, otherwise the needle
may break or the machine may be damaged.
• When using the twin needle, be sure to attach zigzag foot "J", otherwise the needle may break or the
machine may be damaged.
Note
• The walking foot can only be used with straight or zigzag stitch patterns. Do not sew reverse stitches with
the walking foot.

Utility stitches

Stitch Name
Left J
Center J
Triple stretch
J
stitch
Stretch stitch J
Zigzag stitch J
3-point zigzag
J
stitch
G
G
Overcasting
stitch
J
J
R
Blind hem stitch
R
Appliqué stitch J
Shell tuck stitch J
* Select a stitch width of 5.0 mm (3/16 inch) or less.
52
CAUTION
Pattern
Application
No.
Basic stitching, sewing gathers or pintucks,
00
etc.
Attaching zippers, basic stitching, and
01
sewing gathers or pintucks, etc.
Attaching sleeves, sewing inseams, sewing
02
stretch fabrics and decorative stitching
Sewing stretch fabrics and decorative
03
stitching
04 Overcasting and attaching appliqués
Overcasting on medium weight or stretch
05
fabrics, attaching elastic, darning, etc.
Overcasting on thin or medium weight
06
fabrics
07 Overcasting on thick fabrics
08 Overcasting on stretch fabrics
09 Overcasting on thick or stretch fabrics
Blind hem stitching on medium weight
10
fabrics
11 Blind hem stitching on stretch fabrics
12 Appliqué stitching
13 Shell tuck stitching
Stitch Width Stitch Length
[mm (inch)] [mm (inch)]
Auto Auto
Manual Manual
0.0 (0) 2.5 (3/32)
0.0–7.0 0.2–5.0
(0–1/4) (1/64–3/16)
3.5 (1/8) 2.5 (3/32)
0.0–7.0 0.2–5.0
(0–1/4) (1/64–3/16)
0.0 (0) 2.5 (3/32)
0.0–7.0 1.5–4.0
(0–1/4) (1/16–3/16)
1.0 (1/16) 2.5 (3/32)
1.0–3.0 1.0–4.0
(1/16–1/8) (1/16–3/16)
3.5 (1/8) 1.4 (1/16)
0.0–7.0 0.0–4.0
(0–1/4) (0–3/16)
5.0 (3/16) 1.0 (1/16)
1.5–7.0 0.2–4.0
(1/16–1/4) (1/64–3/16)
3.5 (1/8) 2.0 (1/16)
2.5–5.0 1.0–4.0
(3/32–3/16) (1/16–3/16)
5.0 (3/16) 2.5 (3/32)
2.5–5.0 1.0–4.0
(3/32–3/16) (1/16–3/16)
5.0 (3/16) 2.5 (3/32)
0.0–7.0 0.5–4.0
(0–1/4) (1/32–3/16)
5.0 (3/16) 2.5 (3/32)
0.0–7.0 0.5–4.0
(0–1/4) (1/32–3/16)
2.0 (1/16)
0 (0)
1.0–3.5
-3← →3
(1/16–1/8)
2.0 (1/16)
0 (0)
1.0–3.5
-3← →3
(1/16–1/8)
3.5 (1/8) 2.5 (3/32)
2.5–7.0 1.6–4.0
(3/32–1/4) (1/16–3/16)
4.0 (3/16) 2.5 (3/32)
0.0–7.0 0.2–4.0
(0–1/4) (1/64–3/16)
Yes*
Rev.
( J )
Yes*
Rev.
( J )
Yes*
Reinf.
( J )
Yes
Reinf.
( J )
Yes*
Rev.
( J )
Yes*
Reinf.
( J )
No Reinf.
No Reinf.
Yes*
Reinf.
( J )
Yes*
Reinf.
( J )
No Reinf.
No Reinf.
Yes*
Reinf.
( J )
Yes*
Reinf.
( J )