Important Safety Instructions - Brother CE1125PRW Operation Manual

IMPORTANT SAFETY
INSTRUCTIONS
Please read these safety instructions before
attempting to use the machine.
DANGER
- To reduce the risk of electric shock:
1
Always unplug the machine from the electrical
outlet immediately after using, when cleaning,
when making any user servicing adjustments
mentioned in this manual, or if you are leaving
the machine unattended.
WARNING
- To reduce the risk of burns, fire, electric shock, or
injury to persons.
2
Always unplug the machine from the electrical
outlet when making any adjustments mentioned
in the instruction manual:
• To unplug the machine, switch the machine to the
symbol "O" position to turn it off, then grasp the
plug and pull it out of the electrical outlet. Do not
pull on the cord.
• Plug the machine directly into the electrical outlet.
Do not use an extension cord.
• Always unplug your machine if the power is cut.
3
Electrical Hazards:
• This machine should be connected to an AC
power source within the range indicated on the
rating label. Do not connect it to a DC power
source or inverter. If you are not sure what kind
of power source you have, contact a qualified
electrician.
• This machine is approved for use in the country of
purchase only.
4
Never operate this machine if it has a damaged
cord or plug, if it is not working properly, if
it has been dropped or damaged, or water is
spilled on the unit. Return the machine to the
nearest authorized dealer or service center for
examination, repair, electrical or mechanical
adjustment.
• While the machine is stored or in use if you
notice anything unusual, such as an odor, heat,
discoloration or deformation, stop using the
machine and immediately unplug the power cord.
• When transporting the machine, be sure to carry it
by its handle. Lifting the machine by any other part
may damage the machine or result in the machine
falling, which could cause injuries.
• When lifting the machine, be careful not to make
any sudden or careless movements, otherwise you
may injure your back or knees.
5
Always keep your work area clear:
• Never operate the machine with any air openings
blocked. Keep ventilation openings of the
machine and foot control free from the build up
of lint, dust, and loose cloth.
• Do not store objects on the foot controller.
• Do not use extension cords. Plug the machine
directly into the electrical outlet.
• Never drop or insert any object into any opening.
• Do not operate where aerosol (spray) products
are being used or where oxygen is being
administered.
• Do not use the machine near a heat source, such
as a stove or iron; otherwise, the machine, power
cord or garment being sewn may ignite, resulting
in fire or an electric shock.
• Do not place this machine on an unstable
surface, such as an unsteady or slanted table,
otherwise the machine may fall, resulting in
injuries.
6
Special care is required when sewing:
• Always pay close attention to the needle. Do not
use bent or damaged needles.
• Keep fingers away from all moving parts. Special
care is required around the machine needle.
• Switch the machine to the symbol "O" position
to turn it off when making any adjustments in the
needle area.
• Do not use a damaged or incorrect needle plate,
as it could cause the needle to break.
• Do not push or pull the fabric when sewing, and
follow careful instruction when freehand stitching
so that you do not deflect the needle and cause
it to break.
1