2
Press the stitch category selection key once
or more and confirm that the character stitch
indicator is lit.
1 Stitch category selection key
2 Character stitch indicator
3
Add new characters by following the
procedure described in "Combining
characters" (page 48).
X
New characters are added next to the last
character of the combination.
■ Making a new combination of characters after
sewing
Memo
• When you have finished sewing, the pattern No.
of the first character in the current combination is
shown on the LCD.
1
Select the first character of the new combination.
2
Press the "+" side of
adjustment key).
X
The old combination of characters is cleared
from memory, and the pattern No. shown in
the LCD is entered as the first character of a
new combination.
3
Add characters by following the procedure
described in "Combining characters" (page 48).
(stitch width
Checking characters
You can check the characters in a combination with
following method.
1
Press the "+" or "-" side of
adjustment key) repeatedly.
This will display the characters that have been
entered one by one on the LCD.
You can check the pattern No. and position of
each character.
1 Stitch length adjustment key
2 The position of the selected pattern No.
3 The total number of characters in the combination
4 Selected pattern No.
Deleting characters
You can delete characters from the combination.
1
Press "-" side of
key) to delete the last character in the
combination.
1 Stitch width adjustment key
X
The last character will be deleted.
Memo
1
• Repeat step
to delete more characters.
• You can only delete the last character in a
combination.
UTILITY STITCHES
(stitch length
(stitch width adjustment
49
3