Brother CE1125PRW Operation Manual page 50

UTILITY STITCHES
5
Attach the presser foot indicated on the LCD.
1 The presser foot to use
• For details, refer to "Replacing the presser
foot" (page 23).
6
If you would like to only sew this single
character, start sewing.
If you would like to sew a sequence of
characters, see the following procedure.
• For details on sewing characters, refer to
"Sewing the character stitches" (page 50).
■ Combining characters
You can easily sew names, messages, etc. by
combining the character stitches. Up to 35
characters can be combined.
[Example] Selecting stitches "COME" (No.
03)+(No. 15)+(No. 13)+(No. 05)
1
1
Follow steps through
characters" (page 47) to select the first
character "C" (No. 03).
2
Press (stitch selection keys) to select the
next character, "O" (No. 15).
3
Press the "+" side of
adjustment key) to enter the selected
character.
4
2
Repeat steps and
and "E" (No. 05).
Memo
• To enter a space, select "_" (No. 30).
48
5
in "Selecting
(stitch width
3
to add "M" (No. 13)
5
When you have finished combining
characters, check the entered characters and
their order.
• For details on checking characters, refer to
"Checking characters" (page 49).
Memo
• A new character can only be added next to
the last character. You cannot insert a new
character between characters or before the
first character of the sequence.
6
After checking the entered characters, start
sewing.
• For details on sewing characters, refer to
"Sewing the character stitches" (page 50).
Memo
• The combination of characters will be stored in
memory even if you turn off the machine.
■ Adding new characters after sewing
After sewing a combination of characters, you
can add characters to the combination using the
following method.
Memo
• When you have finished sewing, the pattern No.
of the first character in the current combination is
shown on the LCD.
1
Press the stitch category selection key to
select the utility stitch. (Do not skip this step.)
1 Stitch category selection key
2 Utility stitch indicator