Table of Contents
Advertisement
UTILITY STITCHES
Checking characters
You can check the characters in a combination with
following method.
a
Press the "+" or "-" side of
adjustment key) repeatedly.
This will display the characters that have been
entered one by one on the LCD.
You can check the pattern No. and position of
each character.
N
a Stitch length adjustment key
b The position of the selected pattern No.
c The total number of characters in the combination
d Selected pattern No.
Deleting characters
You can delete characters from the combination.
Press "-" side of
a
key) to delete the last character in the
combination.
N
The last character will be deleted.
N
Memo
a
● Repeat step
to delete more characters.
● You can only delete the last character in a
combination.
Sewing the character stitches
All character stitches are sewn with monogramming foot "N".
a
Select a character stitch.
• For details, refer to "Selecting characters"
(page 46)
48
(stitch length
(stitch width adjustment
b
Attach monogramming foot "N".
• For details, refer to "Replacing the presser foot"
(page 22).
c
Start sewing.
The stitch is sewn in the direction indicated by
the arrow.
Memo
● When sewing characters, the machine
automatically sews reinforcement stitches for each
character.
● While sewing, the LCD shows the pattern No.
currently being sewn.
d
When you have finished sewing, use scissors to
trim off any excess threads at the beginning of
the stitching and between the characters.
Hide quick links:
Advertisement
Table of Contents
